844-309-2376

Decontamination Consumables During A Pandemic

Infectious diseases are challenging to identify immediately, in fact, in general, they are not identified until a person is showing symptoms and are later tested. This means that in the days or even weeks before symptoms occur, a person is more than likely leaving a trail of contagious germs all over. Not only is personal hygiene extremely important (washing your hands, not touching your face etc.) but preventative measures on larger scales are also necessary.

Different areas will of course require different methods of preventative measures, but in some of the more crucial areas such as hospitals, factories, pharmacies and commercial operations; proper protocols must be implemented in order to keep from cross-contamination or re-contamination. Correct use of decontamination consumables is going to be one of the strongest treatments of spreading contagions and there are appropriate guidelines to follow to safeguard these areas.

Although such germs cannot be seen by the human eye, it can be assumed that they can be anywhere a person can touch, cough or sneeze on and even float into the air landing in near areas that we do not consider. In general, we should take extra precautions to ensure less of a spread and more of a control. We are facing a situation in which we do not fully understand, but we do understand the importance of social mannerisms and social distancing that will prevent the spread of these contagious diseases as well as how critical it is to clean our areas and continue to work hard against contaminating others.

The Teknipure team is working continuously to provide such products for the best possible decontamination solutions and we understand the importance of infectious disease control. We are available for any questions surrounding proper methods of cleaning and decontamination of all surfaces

 

 

COVID-19 Update & Surface Wiping Guide

In light of all that is happening in our world today with the COVID-19 virus, Teknipure would like to communicate our own internal controls and safeguards to keep our staff healthy and our production continuous. Our production team operates in an ISO 5 cleanroom with very high air flow and filtration, while clothed in full PPE including face masks, operating in a low contagion risk environment.

Prior to beginning work, all operators receive a temperature check; if above 100.4℉, the employee must leave the facility and get tested for the virus. If anyone feels ill, they will be temperature checked, following the same protocol. We are frequently cleaning common surfaces (with our alcohol wet wipes) and all employees are embracing enhanced hand hygiene and washing frequency. To date, no one on staff is infected and we are resuming standard office hours.

Health officials have shared that the best policy is minimal interaction with others (when possible), enhanced hand and surface hygiene, keeping hands away from the face, a strong immune system, and wiping surfaces with cleaners that kill the virus to prevent exposure. Wipes saturated with a sanitizer like 70% IPA (Isopropyl Alcohol), or a disinfectant effectively kills the virus on all surfaces.

Use the button below to read the information we are sharing proper surface wiping procedures to help you realize best cleaning efficacy.

The 4 Cleanest Places on Earth

You probably wouldn’t want to spend time inside some of the cleanest places on earth, yet, they are all pretty spectacular! Here are four man-made dust-free environments making big contributions to the world of science and technology.

1. Class 1 Cleanroom
In a Class 1 cleanroom, only 2.5 particles (larger than 0.5 micrometers each) are allowed per cubic meter of air. To put it in perspective, this class of cleanroom is, on average, 14 million times cleaner than the world outside your window.

2. Vacuum Chamber
A vacuum chamber is exactly as it sounds, a sealed enclosure where all the air has been pumped out. The resulting low-pressure is used by researchers to carry out physical experiments, or test mechanical devices without contamination by foreign bodies. The world’s largest thermal-vacuum chamber is at NASA’s Glenn’s Plum Brooke Station in Sandusky, OH.

3. Fusion Reactor
At temperatures exceeding 15 million degrees Celsius (30,000 times hotter than the sun’s surface), it’s safe to say a fusion reactor is a guaranteed dust-free environment. It’s been over 60 years since experiments began and still, no reliable reactor has been created, but stay-tuned a multination project to build a fusion reactor in France is now underway.

4.Large Hadron Collider
Ranking near the top as one of the “cleanest places on earth” is the world’s largest and highest-energy particle accelerator, the Large Hadron Collider (LHC). This 17-mile-long collider took 10 years to complete and sits 600 feet beneath the French-Swiss border near Geneva. The collider was created to be a tool for physicists to test their theories about particle physics.

Teknipure is a Proud Donating Member of

 

To learn more, to request samples, technical data sheets, or quality certificates call us today at 844.309.2376 or email us at Info@nullTeknipure.com